首页
  • 产品
  • 新闻
  • 联系我们
  • 首页 > 产品 > 压电石英晶片 > 石英晶片
    压电石英晶片
    压电石英晶片压电石英晶片压电石英晶片
    压电石英晶片压电石英晶片压电石英晶片

    压电石英晶片

    该材料由单晶右旋a石英人工生长棒组成,用于制作压电材料,如在其长度沿Y轴的种子上,在水热条件下的定时频率控制和频率选择。

    下载文件
    分享

    This material consists of single-crystal right-handed a-quartz artificially grown bars which is intended for use in fabrication of piezoelectric for such as timing frequency control and frequency selection under hydro-thermal condition on a seed with its length along the Y axis.

    该材料由单晶右旋a石英人工生长棒组成,用于制作压电材料,如在其长度沿Y轴的种子上,在水热条件下的定时频率控制和频率选择。

    MaterialQuartz Blanks( Piezo Grade)
    MaterialsBoth Pure Z and Y Bar available
    Synthetic Q-ValueMin 1.8x10^6, 2.4x10^6 to 3.0x10^6     IEC
    Etch Channel DensityMax 10/c㎡, Max 30/c㎡, Max 100/c㎡, Max 100/c㎡, Max 300/c㎡; Swept
    Inclusions DensityIa, Ib, I, II, III
    Cut TypeAT, BT, CT, DT, GT, NT, FC, SC, IT, …, etc
    Angle Tolerance(±)Theta Angle: ±5″, ±10″, ±15″, ±30″, ±1′, ±2′, … , etc     
    Phi Angle:±5′, ±10′, ±15′, ±30′, … , etc
    Diameter For Round BlankFrom 3.0mm to 50.80mm (with flat)
    Size For Square Blank1.6x1.6mm ~ 38x38mm
    Size For SMD Blank1.2x2.4mm Above at Customer option
    Diameter/Size Tolerance(±)±0.01 mm
    Frequency1 Mhz up to 54Mhz for AT-Cut Fundamental; Upto 70Mhz By Etching
    FlatAs request the flat shall be perpendicular to X axis within ±10 deg
    Surface Finishing#1000(9u); #2000(7u); #3000(5u); #4000(3u) (Sic); Polished(Cerium oxide)and & etched  Std  
    OvertoneFundamental; Third Overtone (3rd); Fifth Overtone (5th)
    Contouring (Diopter)Plano-Convex: 0.5 Diopter ~ 10 Diopter         Bi-Convex: 10 Diopter ~ 15 Diopter 
    产品列表
    联系我们
    • 电话: 0571 8580 3731
               0571 8580 3723
    • 手机: 19916574553(微信同号)
               13858155018(微信同号)
    • 邮箱: sales@csimc-freqcontrol.com
    • 网址: https://www.cqtgroup.com
    • 地址: 中国 浙江 杭州市钱江新城五星路198号瑞晶国际商务中心1106-1室 310006
    关注我们

    Copyright © 杭州中晶电子科技有限公司 版权所有 | 网站地图 |
    技术支持   
    备案号:浙ICP备2022033223号-1